This heat transfer, iron on vinyl is perfect to add to your project to give a clear high gloss finish. Because this htv is polyurethane, it will be great to sublimate on after you adhere it to your project. This means you can place this on a cotton shirt and then sublimate on it.
This htv cuts and weeds with ease, and can be layered with other htv, but try to keep this one as the top layer so you do not lose the high gloss finish. There is a slight elasticity to the htv that also makes it perfect on many different materials. It is a high quality vinyl that you can use to decorate your fashions for yourself or your home.
Application instructions for an iron ( as recommended by manufacture )
- Mirror your image
- Cut
- Weed excess vinyl
- Preheat for 2 to 3 seconds
- Set temperature between Cotton & Linen on your iron
- Protect your design with parchment paper or teflon sheet
- An ironing board is not recommended, you need a hard flat surface.
- Press down on your iron very firmly, do not move the iron around, pick it up and move it to the next section
- Press for 10 -15 seconds on each section
- If you see any parts lifting a bit after you press it, replace the protector sheet and press again for another 10 seconds
- You can peel the carrier, or transfer sheet warm
Application Instructions for a heat press
- Mirror your image
- Cut
- Weed excess vinyl
- Preheat for 2 to 3 seconds
- Protect your design with parchment paper or teflon sheet
- Preheat press to 295°F / 146°C
- Press at medium pressure for 10 seconds
- You can peel the carrier or transfer sheet while still hot
