Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″
Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″

Siser Holographic - Holo HTV, Heat Transfer Vinyl– 20″

Regular price $3.17
Unit price  per 
Shipping calculated at checkout.

Siser Holographic htv is a must have for your vinyl collection.  This heat transfer vinyl changes colours when in movement.  It will make anything you apply it to look professional with bling. 

Cutter Settings as recommended by the manufacture:

Cricut:

  • Use standard blade
  • Cut on light cardstock setting

Silhouette Cameo:

  • Use standard Blade:  3
  • Cut on: Heat Transfer, Smooth
  • Speed: 8
  • Force: 14

Scan N Cut:

  • use standard Blade:  2
  • Cut Speed: 1
  • Cut Pressure: 3
Application instructions for an iron ( as recommended by manufacture )
  • Mirror your image
  • Cut
  • Weed excess vinyl
  •  Preheat for 2 to 3 seconds
  •  Set temperature between Cotton & Linen on your iron
  • Protect your design with parchment paper or teflon sheet
  • An ironing board is not recommended, you need a hard flat surface.
  • Press down on your iron very firmly, do not move the iron around, pick it up and move it to the next section
  • Press for 15 seconds on each section
  •  If you see any parts lifting a bit after you press it, replace the protector sheet and press again for another 10 seconds
  • You can peel the carrier, or transfer sheet cold


Application Instructions for a heat press

  • Mirror your image
  • Cut
  • Weed excess vinyl
  • Preheat for 2 to 3 seconds
  • Protect your design with parchment paper or teflon sheet
  • Preheat press to  320°F / 160°C
  • Press at medium pressure for  15- 20 seconds
  • You can peel the carrier or transfer sheet cold