Siser glow in the dark is a must have especially for your halloween projects. It is white in the daylight and a green at night. To activate the glow, you can hold it to a bright light or the sun. This htv is like most and can be layered with other htv products. This htv is best suited for cotton, cotton blends and polyester leathers. It is suggested that you wait 24 hours before washing. Use cold water wash with mild detergent. It can be placed in the dryer on normal settings, but not recommended for dry cleaning.
Application instructions for an iron ( as recommended by manufacture )
- Mirror your image
- Cut
- Weed excess vinyl
- Preheat for 2 to 3 seconds
- Set temperature between Cotton & Linen on your iron
- Protect your design with parchment paper or teflon sheet
- An ironing board is not recommended, you need a hard flat surface.
- Press down on your iron very firmly, do not move the iron around, pick it up and move it to the next section
- Press for 15 seconds on each section
- If you see any parts lifting a bit after you press it, replace the protector sheet and press again for another 10 seconds
- You can peel the carrier, or transfer sheet hot or cold
Application Instructions for a heat press
- Mirror your image
- Cut
- Weed excess vinyl
- Preheat for 2 to 3 seconds
- Protect your design with parchment paper or teflon sheet
- Preheat press to 305°F / 150°C
- Press at medium pressure for 10-15 seconds
- You can peel the carrier or transfer sheet hot or cold
