Siser Easy Pattern Red Buffalo Plaid Heat Transfer Vinyl– 12″ with TTD High Tack Mask

Siser Easy Pattern Red Buffalo Plaid Heat Transfer Vinyl– 12″ with TTD High Tack Mask

Regular price $6.50
Unit price  per 
Shipping calculated at checkout.

Siser, EasyPatterns™ Heat Transfer Vinyl in the red buffalo plaid pattern.  

This red buffalo pattern will make a bold statement on any project that you apply it to

Application instructions for an iron ( as recommended by manufacture )

  • Cut  – don’t mirror
  • Weed excess vinyl
  • Attach the transfer / carrier sheet - High Tack Mask TTD 
  •  Preheat for 2 to 3 seconds
  •  Set temperature between Cotton & Linen on your iron
  • Protect your design with parchment paper or teflon sheet
  • An ironing board is not recommended, you need a hard flat surface.
  • Press down on your iron very firmly, do not move the iron around, pick it up and move it to the next section
  • Press for 15 seconds on each section
  •  If you see any parts lifting a bit after you press it, replace the protector sheet and press again for another 10 seconds
  • You can peel the mask, or transfer sheet hot or cold


Application Instructions for a heat press)

  • Cut  – don’t mirror
  • Weed excess vinyl
  • Attach the transfer / carrier sheet - High Tack Mask TTD 
  • Preheat for 2 to 3 seconds
  • Protect your design with parchment paper or teflon sheet
  • Preheat press to  305°F / 150°C
  • Press at medium pressure for  10-15 seconds


We at Stickitvinyl include the tack mask needed with every purchase so you do not have to buy it seperately.  Each piece of tack is reusable, with a 12" you will receive a 12", a 24" of camo, you will receive a 12" of tack and with a 5' or camo you will receive a 2' piece of tack.  Make sure you save it and reuse with all of your patterned htv.