Easyweed electric has bold and bright colours that shimmer and have pearlescent effects to them. The best part is you can layer this with all other htv products.
Application instructions for an iron ( as recommended by manufacture )
- Mirror your image
- Cut
- Weed excess vinyl
- Preheat for 2 to 3 seconds
- Set temperature between Cotton & Linen on your iron
- Protect your design with parchment paper or teflon sheet
- An ironing board is not recommended, you need a hard flat surface.
- Press down on your iron very firmly, do not move the iron around, pick it up and move it to the next section
- Press for 15 seconds on each section
- If you see any parts lifting a bit after you press it, replace the protector sheet and press again for another 10 seconds
- You can peel the carrier, or transfer sheet hot or cold
Application Instructions for a heat press
- Mirror your image
- Cut
- Weed excess vinyl
- Preheat for 2 to 3 seconds
- Protect your design with parchment paper or teflon sheet
- Preheat press to 305°F / 150°C
- Press at medium pressure for 10-15 seconds
- You can peel the carrier or transfer sheet hot or cold